2005

I am seeking a full time position as a technical representive, trainer, or production "management trainee". I posess a highly developed technical and mechanical knowledge base with production supervisory experience in highly technical equipment.

I lost my spouse 2 years ago and will not be able to fully retire until my own old age kicks in if I continue to live in the GTA. I do not want to freelance or do piece work, but become a part of a growing company where I can devote my time to a team.

For the past year I have been refitting the pictured vessel to CG passenger and ABYC standards. This is is a highly technical project requiring mechanical and electrical skills at a journeyman level.

www.cruising.ca

Editor - designer
Canada's large boating web site approximately 1,000,000 hits per month.

1998 - 2000

CANADIANET COMMUNICATIONS

www.canadianet.com

President and technical director
Internet hosting and design services.

1997

IMG DESIGN

Freelance INTERNET PRODUCTION Montreal , Quebec
My work was freelance assignments from USA companies preferring to use cgi or Perl over less stable technologies which limit the viewer.

1996-97

BeOnTheNet

Technical Sales and production
New York City

BOTN was a deliberate move to mainstream fifth avenue clients.

1995-1997

RED LIGHT MAGAZINE

MARKETING DIRECTOR
New York City
Developed market strategies and sales for Red Light Magazine. Today RLM generates over 8 million hits per month.

1995

IMAGEQUEST

Freelance production services.
Marine Mechanic Fabricator

1990 - 1995

CHARTER

Captain & Shipwright

Centaur a 65' John Hanna designed motor sailor with the plan of living aboard and restoration for charter. Yacht deliveries east coast territorial waters.

1986 1989

Cruising

I turned the 42' ketch I had built south stopping for a year in Atlantic Highlands to complete the AVT project.

1986-1987

TECHNICAL DIRECTOR AVT

Audio Visual Transfer
VICE PRESIDENT AND TECHNICAL DIRECTOR
Atlantic Highlands, New Jersey

Design, engineering and manufacture of the 15 projector multiplexer. Design, interfaces, and environments for Broadcast post production facility specializing in multi-media distribution. Video hardware included Sony 1", 3/4", Betacam VCRs, Hitachi Z31c cameras, mass duplication systems, Arriflex cameras, and test/control procedures.

I Designed, and manufactured consumer transfer hardware for franchise operations from concept requirements to finished product. Joint development of franchise business for Video Producer equipment. Total design and construction of hardware and production line.

1981-1986

AMI TECHNICAL STANDARDS CHAIRPERSON

Vice President and founding member AMI of Canada.

The "Association of Multi-Image International" " presented me their " LIFETIME ACHIEVEMENT AWARD " for significant contributions to the industry (1984). In my capacity as chairperson, I drafted, and produced the " AMI Recommended Production Practices volume I & II", taught multi image production and post production seminars to industry members. Within the international Multi Image industry I was active presenting technical papers, workshops, and overall organization. In the broadcasting industry I liaised with SMPTE, and ANSI in formalizing the practices.

My formal classroom teaching experience is limited to conducting 1 to three day learning seminars every couple of months over a period of approximately three years on behalf of the AMI and other industry sponsors. However for the five years of POS,STS & AVT a primary job function was the training and management of staff which was one to one, or one to three ongoing training function encompassing most phases of film and video post production.

1983

PRODUCERS OPTICAL SERVICES INC

SLIDE TRANSFER SERVICES INC.

TECHNICAL DIRECTOR
Philadelphia & Toronto

Engineering and design of the first nine projector multiplexer for film or video Multi-Image Transfer post production service

1977-1979

DIRECTOR OF PHOTOGRAPHY

The AV House Toronto, Canada Overall responsibility for up to 200 audio visual or video shows per year.
Rebuilt a 24' east coast wooden cutter.

1975-1977

HART ASSOCIATES

London England

• Illustrative-commercial photography # Dunhill catalogue
• Awarded membership in Royal Photographers Society

1970-1974

THE MORRISH STUDIO

• Professional photography ( master PPOC )

1966-1970

BROOKS INSTITUTE OF PHOTOGRAPHY BPA

• Commercial Illustrative
• Motion Picture
• Underwater courses

1964-1965

CANADIAN NATIONAL SKI TEAM

• Canadian Silver Medal